Home > Tips
News

Tips

12/21/2018
Product Improvement
Update the gap between DE Housing and gear ring
05/14/2018
We can provide all Rotatable Flange Starters Cross Reference of Delco Remy 39MT
04/28/2018
Adding 12 Volts to the S Terminal Circuit to verify that the starter motor works.
04/04/2018
On a good and working starter motor, as soon as this 12 Volt Signal is received, the starter motor comes alive and cranks the engine. This test verifies the presence of these 12 Volts and indirectly tests the Ignition Switch and the Neutral Safety Switch.
03/22/2018
The battery's condition is the most important part of the starter Tests and the first thing that has to be checked.
There are two parts to do this test. Visually checking that the battery terminals for obvious problems and Testing the battery's voltage w
03/09/2018
There are some main circuits when doing starter test. NO.1: This is where the battery positive cable from the battery is attached to. NO.2: This is the S terminal of the starter Solenoid. NO.3: The grounding point.
01/26/2018
It doesn't matter where the starter is at, these tests apply. Whether the starter motor has to be accessed from the bottom of the vehicle or not here are some safety guidelines.
01/12/2018
This is a brief summary of the tests about what's causing a NO CRANK Condition on your car or truck.
12/27/2017
Before we start, you may want to know what are some of the most common symptoms of a BAD starter.
11/15/2017
Do you know how Starter Motor works